technical specifications maximum operating voltage: 250vac at 60c maximum operating frequency: dc to 400hz at 60c hipot test voltage: pn e 2000vac; p n 1200vac mtbf at 60c, 230v per mil-hb-217f: fn 2101 1,384,000 hours; fn 2102 945,000 hours temperature range: -25c to +100c flammability class: ul 94v2 approvals electrical schematics filter current ratings at 60c* (25c) a leakage current (230v/50hz) ma/phase power loss max. w component values ll1cxcy mh h f nf weight g 3 (4.0) 6 (8.2) 10 (13.6) 16 (19.6) 3 (4.0) 6 (8.2) 10 (13.6) 16 (19.6) 0.29 0.29 0.29 0.29 0.29 0.29 0.29 0.29 0.92 1.36 1.64 3.1 1.44 1.8 2.4 4.0 52 52 55 57 60 62 66 66 2.5 - 0.1 3.3 0.69 - 0.1 3.3 0.23 - 0.1 3.3 0.12 - 0.1 3.3 1.45 93 0.1 3.3 0.5 21 0.1 3.3 0.14 9.8 0.1 3.3 0.048 2.8 0.1 3.3 fn 2101-3/06 fn 2101-6/06 fn 2101-10/06 fn 2101-16/06 fn 2102-3/06 fn 2102-6/06 fn 2102-10/06 fn 2102-16/06 *16a types at 50c approved note: the line side of the filter is always fitted with wire terminals. fn 2101 / fn 2102 ? 3 to 16a current ratings ? x1 capacitors for extra immunity to high voltage transients ? performance maintained at high frequencies ? additional choke option for higher differential-mode attenuation ? nennstr?me von 3 bis 16 a ? x1-kondensator fr ?u?erste st?rfestigkeit gegen hohe spannungs-transienten ? leistung wird auch bei hohen frequenzen beibehalten ? optional zus?tzliche drossel fr eine h?here gegentakt-d?mpfung ? de 3 16 a ? condensateurs x1 pour une immunit supplmentaire aux transitoires haute tension ? performances maintenues aux hautes frquences ? self en option pour une attnuation suprieure en mode diffrentiel compact feedthrough chassis-mounting filter 124
fn 2101 / fn 2102 insertion loss per cispr 17; a = 50 ? /50 ? sym, b = 50 ? /50 ? asym mechanical data front side end 200 5 20.1 0.5 1.25 0.2 10.9 0.3 fn 2101: 51 0.5 fn 2102: 60 0.5 3a and 6a types: wire awg 18 10a and 16a types: wire awg 16 26.5 0.2 40 0.1 52 0.2 ?4 0.1 0.5 6 27.5 +0.8 -0.3 panel cut-out m3 21.5 0.5 28.5 0.5 40 0.1 r3 +0 -0.3 125 all dimensions in mm; 1 inch = 25.4 mm
|